How to establish a connection between your Android phone and your Jarv Advantage / Advantage HR Smart watch
A .Please follow the steps below. Check if the Android version of your phone is Android 4.3 and above, and if it supports Bluetooth 4.0 Low Energy?
To determine which version your device is running on, select "Settings > More > About Device
1. Please select
Please click "More > About Device"
3. Android version is in the red square.
B. After you checked the above, please follow the steps below to connect to the i-gotU Life app:
1. Please download and install the i-gotU Life app on your phone:
Please ensure that you have correctly worn the Jarv Advantage / Advantage HR Smart watch and that it is fully charged. Please refer to the user manual for additional details on these steps.
Note: The Jarv Advantage / Advantage HR has a power protective design. It has to be fully charged, otherwise it cannot be connected and/or prompted for firmware upgrades on the App.
2. After wearing your Jarv Advantage /
Advantage HR Smart watch, please open the i-gotU Life
app and click "Yes. First Time" to start the installation.
If you have installed it before, please
click "No, Not first time”.
3. Please make sure that your
Jarv Advantage / Advantage HR Smart watch is fully charged when using it for
the first time. It takes about 2 hours before it is fully charged, if you have
not fully charged your smart watch it will not work as expected. Please click
4. If you have not turned on your phone
Bluetooth function, it will prompt you to turn it on. Please select "Yes".
5. After turning ON your Bluetooth, i-gotU Life will start to scan for available Bluetooth devices.
1. If your device Bluetooth function cannot detect your Jarv Advantage / Advantage HR Smart watch , please click the Jarv Advantage / Advantage HR Smart watch button once and then back to the App and scan again. If it still does not find anything, please charge your Jarv Advantage / Advantage HR Smart watch for 10 seconds to remove power protective mode... and scan again.
2. Jarv Advantage / Advantage HR Smart watch will connect to the server and check the firmware version where the Jarv Advantage / Advantage HR Smart watch was first connected, Please make sure Wi-Fi or 3G network of your phone has been turned on.
6.Please select "Q-Band / Q-Watch" from the list of devices to connect.
7. Please click the button of your Jarv
Advantage / Advantage HR Smart watch twice in 30 seconds in
order to confirm the connection of the device.
8. Now, your Jarv
Advantage / Advantage HR Smart watch is connected. Please click "NEXT".
9. You will need to input the correct personal
information, or it will not analyze your sport data accurately.
10. i-gotU Life
will auto-detect the firmware of your Jarv Advantage / Advantage HR Smart watch , please click "NEXT" to upgrade to
the latest version.
11. When upgrading the firmware, it will take approximately 10~15 minutes. Please be patient and do not to close the app.
12. Jarv Advantage / Advantage HR Smart
watch is now set up successfully. Please click "Complete" to
start to use it.
13. Please go back to the main page of the
app, it will show "Connected" on the left top. You can start
to use i-gotU Life.