How to establish a connection between your iPhone and the Jarv Advantage / Jarv Advantage HR
1. Please search and install the i-gotU Life app from your iPhone App Store
2. Please make sure your Jarv
Advantage / Jarv Advantage HR is fully charged before connecting to the App.
Note: The Jarv Advantage / Jarv Advantage HR has a power protective design. It has to be fully charged, otherwise it cannot be connected and prompted for firmware upgrades on the App.
3. Please open the i-gotU
Life app on your iPhone and enable your Bluetooth function. Please click "Yes. First Time" to start the
If you have installed this Jarv Advantage / Jarv Advantage HR with any other phone before, please click "No, Not first time"
4. Please make sure your Jarv Advantage / Jarv Advantage HR is fully charged when connecting to the App for the first time. It takes about 2 hours before it is fully charged.
5. Please press the button on your Jarv Advantage / Jarv Advantage HR to turn your device ON and make it visible for devices scan via your Bluetooth connection. Please select "Q-Band / Q-Watch" from the list of devices to connect.
1. If your phone Bluetooth function cannot detect your Jarv Advantage / Advantage HR smart watch, please click the Jarv Advantage / Advantage HR button once and then go back to the App and scan again. If it still does not detect anything, please charge your Jarv Advantage for 10 seconds to remove the power protective mode... and scan again.
2. The Jarv Advantage / Jarv Advantage HR will connect to the server and check the firmware version when it is connected with the phone successfully, please make sure your Wi-Fi or 3G network on your phone has been turned on.
6. After your Jarv Advantage / Jarv Advantage HR and iPhone are connected, please press the button on your Jarv Advantage / Jarv Advantage HR twice in 30 seconds to confirm your Q-Band / Q-Watch.
7. When your Jarv Advantage / Jarv Advantage HR is connected, it will show its Serial Number and firmware version.
8. Please fill in your personal information when used for the first time.
9. i-gotU Life will auto-detect the firmware of Q-Band / Q-Watch, please click "Upgrade" to upgrade to the latest version.
10. When upgrading the firmware, it will take around 10~15 minutes. Please be patient and wait and do not close the app.
11. Once you have completed
the firmware upgrade, please follow the instructions to turn off the Bluetooth
connection on your iPhone, and then turn it ON again.
Note: Please ensure to turn your phone Bluetooth connection back ON again.
12. Your Jarv Advantage / Jarv Advantage HR is now set up successfully. Please click "Complete" to start to use it.